Build Your Own Looper

Design your own Programmable Looper

Select the options above to create your own bespoke Loop Pedal

Programmable Loop / Amp Switch /  Channel Switch

Any combination of the programmable functions above can be assigned to any of the presets. Each of the switches with a programmable function will have it's own preset.

Tuner Mute

The Tuner socket is engaged and the output is muted to allow you to tune in silence

Dedicated Master Bypass

This will bypass all the loops when engaged, so the output is directly connected to the input

Non-Programmable Loop / Amp Switch /  Channel Switch

These switch are On/Off switches, so the functions assigned to them need to be manually switched on or off by pressing the footswitches

Recommended case sizes

3 Switches - 150x80x55mm or above
4 Switches - 254x55x45mm or above
5 Switches - 254x55x45mm or above
6 Switches - 230x145x55 or above
7 Switches - 230x145x55 or above
8 Switches - 230x145x55 or above
9 Switches or above - 275x175x65 or above

The Programmable Functions are programmed as follows

1. Hold down the footswitch that you would like to program for 2-3 seconds and release.
2. Press the Loops that you would like to be activated by the switch you're programming (The LEDs will indicate the pedals that you've selected).
3. Re-hold the initial footswitch for 3 seconds to finish.
4. This can be repeated for the remaining footswitches.

Programmable vs On/Off Mode

Each of the programmable switches can either be set to Programmable or On/Off mode. In programmable mode, the previously active switches disengage when a new switch is pressed. In On/Off mode, the previously active switches stay on when a new switch is pressed, allowing you to add to existing effects. 

To toggle between Programmable and On/Off mode, hold your chosen switch down for 5+ seconds. The switch will flash fast for 3 seconds. You can mix and match between Programmable and On/Off modes. So for example: you could have 3 switches set to Programmable and 5 switches set to On/Off mode.

Features:

• Silent Switches on the Programmable Switches (with Smooth clickless action)
• True Bypass Circuitary
• Suitable for Live use
• Unrivaled Quality
• Aluminium Enclosure
• Bright LEDs for indication
• Chrome LED Bezels
• 3 Year Warranty

Write a review