Programmable 8Ch MIDI Controller

The Programmable MIDI 8 Looper allows 8 loops to be switched at the same time as sending out MIDI commands.

60 Presets are available! Allowing you to save 60 different combinations of pedals and MIDI commands. 

Control 3 separate MIDI pedals per preset, all on different MIDI channels.

Each preset contains the following:

• Any combination of the 8 loops

• Up to 3 different MIDI commands (Program Change and/or Control Change)

• The MIDI Channel that each command above is sent on, can be programmed (MIDI Channels: 0-15) 

The colour of the LEDs and the 3 digit display indicate the bank that the pedal is in.

Features:

• 60 Presets (arranged in 10 banks of presets - 2 of the switches are for bank changes)

• 8 Loops

• Ability to send 3 different MIDI commands per preset (The MIDI channel of each one can be programmed).

• Programmable LED colours (To indicate the bank that the pedal is in)

• 3 digit display for programming and to display active bank and preset.

• Silent Switches (with Smooth clickless action)

• True Bypass Circuitary

• Suitable for Live use

• Diecast Aluminium Enclosure (230x145x55mm)

• 250mA current consumption

• 3 Year Warranty

Types of MIDI command

Each preset can send up to 3 MIDI commands, which can either be Program Change Commands (PC) or Control Change commands (CC). The number of each type of command that is sent can be selected, for example, 3 PC commands could be sent, or 1 PC command and 2 CC commands. The individual MIDI Channel that each command is sent on can be programmed.

Multi-bank Mode

60 Presets are available, arranged in 10 banks of 6 presets. Switches 1 and 2 (the right two switches) are for changing banks. The colour of the LEDs automatically changes when the bank is changed, allowing you to easily see which bank is selected.

The pedal can also be put into single bank mode, where all 8 switches are used for accessing presets. In this mode the LED colours can be programmed to be which ever colour you would like - you can program all the LEDs to be a different colour if required.

Programmable vs On/Off Mode

Each switch can either be set to Programmable or On/Off mode. In programmable mode, the previously active switches disengage when a new switch is pressed. In On/Off mode, the previously active switches stay on when a new switch is pressed, allowing you to add to existing effects. 

Master Bypass

Re-press the active switch to bypass all loops (In programmable mode)

FX Loop Option

Selecting the FX Loop option above allows some of the loops to be routed through the FX Loop in your amp. This option adds two extra sockets to the pedal allowing it to be connected to the FX Loop Send and FX Loop Receive sockets on your amp.

Write a review