All 6 Switches can be programmed to engage any combination of the 6 loops (up to 6 pedals can be engaged at once).
Plug your chosen effect pedals into the SEND and RECEIVE sockets, then engage or disengage them using the footswitches. When one of the loops is 'off', your guitar sound is routed directly to your amp. When it is 'on', your signal is routed through the effects pedals.
Silent Switches
For example
Programming
Programmable vs On/Off Mode
Each switch can either be set to Programmable or On/Off mode. In programmable mode, the previously active switches disengage when a new switch is pressed. In On/Off mode, the previously active switches stay on when a new switch is pressed, allowing you to add to existing effects.
To toggle between Programmable and On/Off mode, hold your chosen switch down for 5+ seconds. The switch will flash fast for 3 seconds. You can mix and match between Programmable and On/Off modes. So for example: you could have 3 switches set to Programmable and 5 switches set to On/Off mode.
Master Bypass
Re-press the active switch to bypass all loops (In programmable mode)
Features | |
Number of Loops | 6 |
Master Bypass | Yes |
Tuner Out | No |
Amp Channel Switch | No |
Technical | |
True Bypass | Yes |
Passive | Yes |
Power | 2.1mm 9V DC Adapter (Negative Center) |
Dimensions | 305x75x55mm |
Case Material | Aluminium |