Secured by PayPal

Click Here

Programmable Looper

Programmable Looper
Programmable Looper
Brand: Buzz Electronics
Product Code: 10Ch-P
Reward Points: 13
Availability: In Stock
Price: £169.95
Price in reward points: 135

2 or more £165.00
5 or more £155.00
10 or more £140.00

Available Options

LED Colours:

* Version:

MIDI Input:

FX Loop Connection:


   - OR -   

All the Switches can be programmed to engage any combination of the loops and amp switches

10 Banks of presets!

Plug your chosen effect pedals into the SEND and RECEIVE sockets, then engage or disengage them using the footswitches. When one of the loops is 'off', your guitar sound is routed directly to your amp. When it is 'on', your signal is routed through the effects pedals.


Version (Selected Above) Number of Loops Number of Amp Switches Presets
Programmable 12 Looper 12 0 100
Programmable 11 Looper with Amp Switch 11 1 100
Programmable 10 Looper with 2 Amp Switches 10 2 100
Programmable 11 Looper 11 0 90
Programmable 10 Looper 10 0 80
Programmable 9 Looper with Amp Switch 9 1 80
Programmable 8 Looper with 2 Amp Switches 8 2 80


For example 

  • Switch 1 could be programmed to activate Loops 1, 3 & 4.
  • Switch 2 could be programmed to activate Loops 2,3,5,& 11.
  • Switch 3 could be programmed to activate Loops 12.
  • Switch 4 could be programmed to activate Loops 1,2,3,4,5,6,7,8,9,10,11 & 12.
  • etc....


  1. Hold down the footswitch that you would like to program for 2-3 seconds and release.
  2. Press the Loops that you would like to be activated by the switch you're programming (The LEDs will indicate the pedals that you've selected).
  3. Re-hold the initial footswitch for 3 seconds to finish.
  4. This can be repeated for the 11 remaining footswitches.

Programmable vs On/Off Mode

Each switch can either be set to Programmable or On/Off mode. In programmable mode, the previously active switches disengage when a new switch is pressed. In On/Off mode, the previously active switches stay on when a new switch is pressed, allowing you to add to existing effects. 

To toggle between Programmable and On/Off mode, hold your chosen switch down for 5+ seconds. The switch will flash fast for 3 seconds. You can mix and match between Programmable and On/Off modes. So for example: you could have 3 switches set to Programmable and 5 switches set to On/Off mode.

Master Bypass

Re-press the active switch to bypass all loops (In programmable mode)


  • Add True Bypass to any effects pedal
  • All pedals can be engaged at once.
  • Program any of the switches to activate any of the loops.
  • Clean up your tone.
  • The loops engage immediately when a switch is pressed.


  • Silent Switches (with Smooth clickless action)
  • 10 Banks of presets (up to 100 presets depending on the version selected above)
  • True Bypass Circuitary
  • Suitable for Live use
  • Unrivaled Quality
  • Diecast Aluminium Enclosure
  • Compact Size (340x125x50mm)
  • Bright LEDs for indication - to display the active preset
  • Chrome LED Bezels
  • 3 Year Warranty
Number of Loops 8
Master Bypass Yes
Tuner Out No
Amp Channel Switch No
True Bypass Yes
Passive Yes
Power 2.1mm 9V DC Adapter (Negative Center)
Dimensions 230x145x55mm
Case Material Aluminium

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Buzz Electronics © 2018